Inateck BR1003 Manuel D'instructions page 9

How to Use
1. Pairing
1) Set the BR1003 to RX mode before turning it on.
2) Turn on the BR1003 by pressing and holding the
Multifunction Button for 3 seconds. Rapidly tap
the Multifunction Button twice to enter pairing
mode with the LED indicator flashes blue and
white alternately.
3) Activate the Bluetooth function on your
transmitting device and find "Inateck BR1003"
to connect. The LED indicator will turn solid
blue after successfully paired.
4) Connect the BR1003 to your headphone or
home stereo playback device through a 3.5mm
audio to enjoy the music.
Note
a. If a PIN code is required for pairing, try 0000,
8888, 1111 or 1234.
b. This product has no built-in microphone which
cannot be used for hands-free calls.
c. BR1003 can remember 8 paired devices, when
the number of paired devices exceeds 8, the
first one will be replaced.
2. Pair with two devices at the same time
In RX mode, BR1003 is able to pair with two
Bluetooth enabled smartphones/tablets at the
same time. Only one device can play music at any
time. You have to stop the music on one device
to play on the other. Please follow the instructions
below:
1) Follow the previous instructions in the "Pairing"
section to pair the BR1003 with your first device.
8