Inateck BR1003 Manuel D'instructions page 8

Bluetooth Receiver Mode (RX)
When BR1003 is in RX mode, you can
connect BR1003 with a non-Bluetooth
audio device like a headphone/ speaker/
audio amplifier via an AUX audio cable.
Then connect BR1003 with Bluetooth
enabled devices like smartphones or
laptops etc. via Bluetooth. Therefore, non-
Bluetooth audio device like a headphone/
speaker can receive audio signals via
Bluetooth.
LED Indicator
LED Indicator(RX Mode)
Blue and white LED flash
alternately
Blue LED flashes twice
every 3 seconds
Solid blue
Status
In pairing mode
Automatically Pairing with
Previously Paired Devices
Successfully paired
7