Led Indicator; How To Use - Inateck BR1003 Manuel D'instructions

LED Indicator

LED Indicator (TX Mode)
rapidly Flashing blue
Blue LED flashes twice
every 3 seconds
Solid blue

How to Use

1. Pairing
1) Set your Bluetooth enabled devices like
Bluetooth headphones or speakers to pairing
mode.
2) Set the BR1003 to TX mode. Then press and
hold the Multifunction Button for 3 seconds to
turn it on. Tap the Multifunction Button twice
to enter pairing mode with the LED indicator
keeps rapidly flashing blue. The BR1003 will
automatically exit pairing mode if there is no
device to be connected within 2 minutes.
3) Place your Bluetooth audio receiving devices like
earphones or speakers closely to the BR1003.
After approximately 30 seconds, pairing will be
completed. The BR1003 LED indicator will turn
solid blue.
4) Connect the BR1003 to your audio output
devices like TV through a 3.5mm audio cable.
Note:
a. BR1003 will enter pairing mode automatically when
powered on for the first time.
b. BR1003 can only automatically re-pair to the 4
most recently connected devices.
Status
In pairing mode
Automatically Pairing with
Previously Paired Devices
Successfully paired
5