F.F. Group EST 250 EASY Notice Originale page 7

EST 250 EASY
instructions to use the machine. Local regulations
may restrict the age of the operator. When not in
use, store the machine out of reach of children.
This machine is not intended for use by persons
f
(including children) with reduced physical, senso-
ry or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the machine
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the machine.
Never work while people, especially children, or
f
pets are nearby.
Never operate the trimmer with missing or bro-
f
ken guards or shields or without guards or shields
in position.
Before use check the supply and extension cord
f
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD BE-
FORE DISCONNECTING THE SUPPLY. Do not use the
trimmer if the cord is damaged or worn.
Before using the machine and after impact, check
f
for signs of wear or damage and repair if necessary.
Never operate the product when you are tired, ill or
f
under the influence of alcohol, drugs or medicine.
Always wear long heavy trousers, boots and
f
gloves. Do not wear loose clothing, jewelery,
short trousers, sandals and never work barefoot.
Wear safety eye protection and ear defenders
f
when operating the machine.
Keep firm footing and balance. Do not overreach.
f
Never work with this trimmer while people, espe-
f
cially children or pets are nearby.
The user is responsible for accidents or hazards
f
occurring to other people or their property.
Wait until the cutting head has completely stopped
f
before touching it. The head continues to rotate
after the trimmer is switched off, the cutting sys-
tem can cause injury/damage.
Work only in daylight or in good artificial light.
f
Avoid operating the trimmer in bad weather con-
f
ditions especially when there is a risk of lightning.
Operating the trimmer in wet grass decreases the
f
efficiency of performance.
Switch off when transporting the trimmer to and
f
from the area to be worked on.
Switch on the trimmer with hands and feet well
f
away from the rotating line.
Caution – do not touch rotating cutting line.
f
Do not put hands or feet near the cutting system.
f
Never fit metal cutting elements to this trimmer.
f
Inspect and maintain the trimmer regularly.
f
Have the trimmer repaired only by an authorized
f
customer service agent.
Always ensure that the ventilation slots are kept
f
clear of debris.
Take care against injury from the blade fitted for
f
cutting the nylon line length. After feeding line
always return the trimmer to its horizontal oper-
ating position before switching on.
Switch off and remove the plug from the socket:
f
Whenever you leave the machine unattended
ƒ
for any period.
Before replacing the cutting line.
ƒ
If the cable is tangled.
ƒ
Before cleaning or working on the trimmer.
ƒ
After use, disconnect the machine from the mains
f
and check for damage.
Store the machine in a secure, dry place out of the
f
reach of children. Do not place other objects on
top of the machine.
Replace worn or damaged parts for safety.
f
Ensure replacement parts fitted are original.
f
Keep the handles dry and free of grease.
f
Always ensure that a device which has been
f
switched off cannot be restarted unintentionally.
Before starting work check the area for animal
f
and objects. Remove all objects that may be
blown away by the unit, or that the thread may
become caught on.
Before starting work check the area and remove
f
all objects which may damage the cutting mech-
anism.
VIBRATION SAFETY
This tool vibrates during use. Repeated or long-
term exposure to vibration may cause temporary
or permanent physical injury, particularly to the
hands, arms and shoulders.
TO REDUCE THE RISK OF ANY VIBRATION-RE-
LATED INJURY:
First be examined by a doctor and then have reg-
ƒ
ular medical check-ups to ensure medical prob-
lems are not being caused or worsened from
use. Pregnant women or people who have im-
paired blood circulation to the hand, past hand
injuries, nervous system disorders, diabetes,
or Raynaud's Disease should not use this tool.
If you feel any symptoms related to vibration
(such as tingling, numbness, and white or blue
fingers), seek medical advice as soon as possible.
Use tools with the lowest vibration when there
ƒ
is a choice.
Take vibration-free breaks during each day of
ƒ
work.
Grip tool as lightly as possible (while still keep-
ƒ
ing safe control of it). Let the tool do the work.
Maintain the device in accordance with the in-
ƒ
structions in the operating instructions.
Avoid working at low temperatures
ƒ
The vibration values specified in the technical
data represent the main uses of the device. The
actual existing vibrations during use may deviate
from these as a result of the following factors:
Incorrect use of the product
ƒ
Unsuitable tools inserted
ƒ
Unsuitable material
ƒ
Insufficient maintenance
ƒ
CONNECTION TO THE POWER SUPPLY
Make sure the power supply information on the ma-
chine's rating plate are compatible with the power
supply you intend to connect it to.
This appliance is Class II* and is designed for connec-
tion to a power supply matching that detailed on the
rating label and compatible with the plug fitted. If
an extension lead is required, use an approved and
compatible lead rated for this appliance. Follow all
the instruction supplied with the extension lead.
English | 07
www.ffgroup-tools.com