Networking The Pdu - Tripp-Lite PDUMH15AT Manuel De L'utilisateur

3. Installation
3.2E
Connect Equipment to PDU: Do not exceed the load rating of the PDU. The total
electrical current used by the PDU will be displayed on the digital meter in amperes. Each
outlet includes a green LED that will illuminate when the outlet is receiving AC power (this
feature only applies to models with switchable outlets).
3.2E

3.3 Networking the PDU

Note: The MAC address of the PDU (a 12-digit string in this format: 000667xxxxxx) is printed on a label
attached to the PDU enclosure. The MAC address is also printed on a label attached to the internal
network card.
If your network's DHCP server will assign a dynamic IP address to the PDU automatically, go
to Step . If you will assign a static IP address to the PDU manually, go to Step
3.4A
you are uncertain which method to use, contact your network administrator for assistance
before continuing the installation process.
21-02-124 933E0A.indb 7 21-02-124 933E0A.indb 7
(continued)
PDUMH15AT
PDUMH20AT
PDUMNH15AT1
(Only Applicable to Models with SNMP Network Card Installed)
7
PDUMH15ATNET
PDUMH20ATNET
PDUMNH20AT1
. If
3.5A
3/25/2021 2:19:08 PM 3/25/2021 2:19:08 PM