Technoline WT 488 Guide D'instructions page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
To use the preset memory
This clock radio features a total of 10 preset memories of FM stations. These allow you to preset your favorite
stations and access them quickly.
1.
Turn on the radio and select a radio station you like to memorize.
Press and hold the SET until "P01" flashes. Press SET once to store Memory 1.
2.
to select another station you like to memorize. Then press and hold SET until "P01" flashes.
3.
Press
/
once, "P02" flashes. Press SET once to store Memory 02.
Press
4.
Repeat Step 2 to 3 to preset memories 3 through 10.
5.
To access a preset station at any time, press the SET one at a time while the radio is on.
6.
To edit a preset station, select another station and then repeat Step 2 to 4. This overrides the original
settings.
To use the sleep timer
1. When radio is on and time is displayed, press RADIO/SLEEP twice to enter the sleep mode. The SL (SLEEP)
LED and the sleep time "05" (5 minutes) come on and will flash on the display.
2. Press the RADIO/SLEEP again as needed to adjust the sleep timer from 5, 15, 30, 45, 60, 75, 90 or OFF.
3. When the display changes back to show the time, press RADIO/SLEEP twice to show the sleep time
remaining.
4. The radio will play for the programmed sleep time and then shut off.
5. To turn off the radio before the sleep time has elapsed, press
Trouble shooting
If your clock radio displays irrelevant time or does not function properly, which maybe caused by electro-static
discharge or other interference, unplug the DC jack to disconnect the AC power (and remove the backup battery)
and leave it for few minutes before powering it up again. The clock radio will be reset to default settings and you
need to set it again.
Care of your product
1.
Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat or
moisture.
2.
Protect your furniture when placing your units on a natural wood and lacquered finish by using a cloth or
protective material between it and the furniture.
3.
Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such as Benzene,
thinner or similar materials can damage the surface of the unit. Make sure the unit is unplugged before
cleaning.
4.
If the unit is not to be used for a prolonged period, such as a month or longer, remove the backup battery to
prevent possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment
thoroughly and replace the batteries.
Specifications
Alarm duration 1 hour
Snooze duration
Sleep timer selections
Volume
Preset Memories of radio
Power adapter
Consideration of duty according to the battery law
Old batteries do not belong to domestic waste because they could cause damages of health and environment. You can
return used batteries free of charge to your dealer and collection points. As end-user you are committed by law to bring
back needed batteries to distributors and other collecting points!
Consideration of duty according to the law of electrical devices
This symbol means that you must dispose of electrical devices separated from the General household waste when it
reaches the end of its useful life. Take your unit to your local waste collection point or recycling centre. This applies to all
countries of the European Union, and to other European countries with a separate waste collection system.
5 to 60 minutes
5, 15, 30, 45, 60, 75, 90 minutes to OFF
L01 (minimum) to L15 (maximum)
10
SW0500600-A02
once.
GB 4

Publicité

Table des Matières
loading

Table des Matières