5.2. Cas de l'installation directe sur poteau
Direct pole mounting
1. Localiser les fentes au dos du boîtier
OutDrop 2+ Epissurage.
2. insérer un collier de fixation (feuillard inox)
dans les fentes.
La largeur du collier (feuillard
inox) ne doit pas dépasser 25 mm.
ABS1497/B
Fig. installation du collier de fixation
installing the mounting strap
OutDrOp 2+ EpiSSurAgE
1. Identify the slots at the rear of the
OutDrop 2+ Splicing.
2. Insert the mounting strap (stainless steel
metal strip) in the slots.
The width of the mounting strap
(stainless steel metal strip) must
not exceed 25mm.
25mm
(max.)
17/34