Bestop 77332 Instructions D'installation page 24

Section 19
Select Correct Patch Loom; Attach to 29' Wire Harness
Step 1 Patch Loom A or B
Patch Loom A o r B
Step 1
Check the keyway on your vehicle loom, it
will be Type A or Type B as shown.
Discard the unused Vehicle Patch Loom that
does NOT have the same keyway type as your
vehicle.
Connect the correct Vehicle Patch Loom to
the 29' Wire Harness.
P24 - 77332 Rev. D 0121
29' Wire Harness
29' Wire
Harness
TYPE A
Installation Instructions - Supertop for Trucks
Step 2
Foam Tape
Hardware
TYPE B
Plug both connectors on the Patch Loom attached to the
29' Wire Harness into the plug coming from the vehicle
1x 1x
stop lamp loom.
On the 29' connection to Patch loom, use 2" pieces of
the foam tape #595.31 provided in the kit and wrap the
foam tape around the connection. This will secure the
connection together.
Foam Tape
Part #595.31
Use another 2" piece of the Foam Tape to secure the wire
2" Pieces
harness to the vehicle cab frame.
29' Wire Harness & Patch Loom
29' Wiring Harness with
Patch Loom A or B attached
CONNECT
CONNECT
Vehicle Stop Lamp
Wiring Loom
Step 2
Page 24
595.31
From Vehicle
CHMSL
© 2021 Bestop, Inc.