Bestop 77332 Instructions D'installation page 20

Section 15
Fold Seat Forward; Remove Upper & Lower Pillar Trim
Step 1
Pull
Step 1
Fold the the driver-side and middle rear
seats forward by pulling on the loop on the
side.
P20 - 77332 Rev. D 0121
Step 2
Remove the seat belt by unscrewing
the T50 Torx bolt.
Remove the upper trim panel by
removing the push pin fastener.
Remove the rear trim panel.
Remove the lower pillar trim panel.
Installation Instructions - Supertop for Trucks
Step 2
Rear
Trim
Page 20
Upper
Trim
Lower
Trim
© 2021 Bestop, Inc.