Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Section 14
Feed Wire Harness Through Sleeves
Step 1
Step 1
Feed the connector and wire harness
through the fabric sleeves on the inside of
the top.
The sleeves run across the top and down
the rear corner of the top fabric.
Use a stiff piece of wire or a rod to fish
the connector through the sleeves.
See Detail.
P19 - 77332 Rev. D 0121
Use a stiff piece of wire to
fish the connector through
each sleeve.
NOTE: Sleeves are slotted
to aid in installation of the
connectors.
Installation Instructions - Supertop for Trucks
Detail
Feed connector and
wire harness through
sleeves in this direction
Page 19
© 2021 Bestop, Inc.
Publicité
Table des Matières
