Turning Off - Di4 SteamClean Surface Manuel D'utilisation

3 Start-up and caution:
3.1 Connect power supply notice:
Input voltage must be same as appliance label indicated voltage.
(1) Plug the plug into the socket as required. The indicator turn red color. It is heating.
(2) When the pressure is ready, the indicator turn green color.
3.2 Cleaning:
Have a trial test in covert first for cleaning any object which material is sensitive to temperature and
humidity. The cleaned object must afford high temperature.
Push the children lock (3) and push steam release button (4) at the same time, spray steam for cleaning.
You can open the safety valve when the steam volume decreases until there is no steam come out.
Please fill water into boiler.
Caution during cleaning:
Don't clean electriferous appliance to prevent electric shock
Chemical fiber and silk can not be cleaned to prevent scald
To prevent window from cracking in winter, keep the jet nozzle 30cm away from glass to
preheat the window first.
3.3 Fill water for a continuous application:
Always wait still no steam release, and there is no pressure in the boiler, the safety valve
can be opened and filling water. When there is pressure in the boiler, the safety valve can
not be opened by special structure for safety protection.
Operation methods push down the steam release button to release steam till steam is run out, then re-
lease the botton and open the safety valve probably some surplus heat will release when open it , filling
water according to contents 3.3.
Restart according to contents 3.1 after filling water.

3.4 Turning off:

Push the steam release button to release steam till no steam comes out, then turn off the steam release
button. Unplug the plug, entwine the cable to cable discal and wipe the appliance,. Pouring the rest of
the water in the boiler . Let it cool down then store it.
STORAGE
Never attempt to cover the hot steam cleaner immediately after use.
18