Product Overview - Toro PowerPlex 40V Max Mode D'emploi

Setup
Mounting the Battery
Charger (Optional)
If desired, mount the battery charger securely on a
wall using the wall-mount key holes on the back of
the charger.
Mount it indoors (such as a garage or other dry place),
near a power outlet, and out of the reach of children.
Refer to Figure 2 for assistance in mounting the
charger.
Note:
Slide and twist the charger over the
appropriately positioned hardware to secure the
charger in place (hardware not included).
Figure 2

Product Overview

Specifications
Battery Charger
Model
Type
Input
Output
Battery Pack
Model
Voltage per cell
Number of cells
Battery pack
voltage
Battery pack
capacity
Battery manufacturer rating = 40V maximum and 36V nominal.
Actual voltage varies with load.
Appropriate Temperature Ranges
Charge the battery at
Use products at
Store products at
Unplug the charger if
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
g194202
6
88542
40V MAX Lithium-Ion Battery
Charger
100 to 120V AC 50/60Hz Max
3.0A
41.8V MAX DC 2.5A
88540 88541
3.6 V 3.6 V
10 20
36 V 36 V
2.5 Ah 5.0 Ah
0°C (32°F) to 40°C (104°F)*
-15°C (5°F) to 60°C (140°F)
-15°C (-5°F) to 60°C (140°F)
Below 0°C (32°F) or above
40°C (104°F)