Fault Finding - Dimas TS350E-02 Manuel D'utilisation Et D'entretien

9 Cutting method
Straight cuts (SEE FIG 14)
(SEE FIG 15)
10 Depth of cut adjustment
(SEE FIG. 16)
11 Maintenance (the motor must be stopped)
(22)
17)
(1)
Store in a dry place, not accessible to
children.
!
Maintain the tools carefully.

FAULT FINDING

(C)
(C)
(SEE FIG
(22)
• The machine does not work
CAUSES
Not plugged in proper-
ly or cable damaged
No mains voltage
Switch defective,
motor cable damaged
Motor faulty (no
power, unpleasant
smell)
• Difficult starting
CAUSES
Single phase motor
starting condenser
Three-phase supply
not correct (on 2
phases, motor cable
faulty)
• The pump does not start
CAUSES
The mains lead is not
correctly connected or
is damaged
No voltage in pump
circuit or mains supply
circuit
• The pump does not pump water
CAUSES
An air bubble may
have formed inside the
pump body
The turbine is jammed
REMEDIES
REMEDIES
REMEDIES
REMEDIES
23