Connection; Connection Precautions - Kenwood AS-IP70 Mode D'emploi

Connection

Connection precautions

Do not plug the power cord of the AC adapter until all connections have completed. Before disconnecting a connected cord or cable, be sure to
turn this unit off (by pressing the OFF button) and unplug the power cord from the power outlet
AM loop antenna
Place on a position with which
the noise during AM reception is
minimum.
• Connect the AM loop antenna to the AM ANTENNA terminals as shown in the illustration.
FM antenna
Using pieces of tape, attach on a position with which
the noise during FM reception is minimum.
AC adapter
Connect to a 230 V AC, 50 Hz
power outlet. Be sure to insert
the blades all the way into the
power outlet slits.
Fit into the groove until it
clicks.
• Open the battery box cover and insert the provided
"AAA" (R03) size batteries with correct polarity
(directions of "+" and "-" poles).
• The clock setting of this unit is backed up even when
the AC adapter is unplugged from the power outlet.
• When replacing batteries, be sure to replace both of
them simultaneously.
CAUTION
• Always use the provided AC-059300A AC adapter with this product.
• The provided AC adapter is designed for exclusive use with the AS-IP70.
• Do not use the provided AC adapter with other products, as this may
cause a fi re or electric shock hazard.
• The battery pack or batteries shall not be exposed to excessive heat such
sunshine, fi re or the like.
7
Click!
Clock backup battery box
English