LENCO BTC-070 Manuel De L'utilisateur page 8

Before first use:
The appliance can be powered either via a wall outlet or by the integrated
1)
battery
Connect the mains adaptor (29) with the power socket DC 5V (6) at the top if the
2)
appliance. Connect the mains adapter (29) to a suitable wall outlet. Make sure
that the power supply voltage is the same as needed.
Basic Function
Bluetooth Operation
Press the button mode (5 or 18) repeatedly, a tone will be heard and the
1)
indicator (4) will quickly flash BLUE.
Turn on the Bluetooth function on your external Bluetooth device, search on it
2)
for the Bluetooth device with the name "Lenco BTC-070" .Select the Lenco BTC-
070 and the pairing will start. Once connected you will hear a beep and the LED
indicator (4) will flash slowly. It could be that you have to enter a password
"0000".
Source selection
Press button (16) twice can switch between BT, AUX, USB, TF mode.
Using with a Wired Device
You can connect an audio device with a 3.5mm connector to the Lenco BTC-070.
Please use the audio cable (30) and connect 1 side to your device (audio out or
headphone out) to the 3.5mm connector (7) of the BTC-070.
6