Ribbon/Paper Installing - Hiti P530D Mode D'emploi

◎ Ribbon/Paper Installing

4.5.1 Install the paper flanges to both side of the
paper roll. Remove the seal attached on the
paper and make sure the front end of the paper
has been pulled up.
4.5.2 Press the button of the rear paper rack to
open the paper rack.
4.5.3 Place the paper into the paper rack by
matching the color of the flange and the holder.
4.5.4 Please rotating the paper flanges manually
to stretch proper length of paper through the gap
of the rear paper rack until the sensor lights.
12