Parts Name And Function - Hiti P530D Mode D'emploi

◎ Parts Name and Function

No. Name
(1) Door open
button
(2) Control panel
(3) Print Output slot
(4) Scrap receptacle
(5) USB slot
(Type A)
(6) USB Slot
(Type B)
(7) Paper jam door
(8) Power Switch
(9) Power slot
(10) Paper sensor
<Internal view>
Function
Press the button to open the front door
Four hard-key and one mono LCM to control and
monitor the condition of the printer
The slot where printed output and scrap come out
Clean it up periodically before full of scraps in the
receptacle
Connect with designated device of HiTi products. Do
not charge with hand-held devices.
To be connected with PC/laptop for transferring data
purpose
Tap to open the door to remove jammed paper
Switch "On" to operate, and switch "Off" when
finishing using the printer. Do not switch off the printer
while the printer is still running.
To be connected with AC power (100V~240V)
When the paper is stretched to the designated position,
the sensor lights.
(10)
9