Connecting To A Dvd Player - Hama Triton Mode D'emploi

• Connect the USB connector on the headset to a free USB port on your PC. The USB connection is a power
supply only. If the power supply from the PC is insuffi cient or you have no free USB ports, you can connect the
USB connector to the power supply unit supplied, which you can then plug into a socket.
• To test the headset, use the test program supplied with your sound card.
• Use the cable remote control to perform individual settings.
1.2 Connecting to a DVD-Player
• Connect the green, orange and black jack plugs on the headset to the corresponding jack sockets on the provided
adapter cable (green plug to green socket, etc.).
• Then connect the adapter cable to the DVD player with 5.1 decoder as follows: Connect the Cinch plug to the
connections on your DVD player in accordance with the codes. The Cinch plugs have two-letter codes.
Red jack plug
Blue jack plug
Green jack plug
• Connect the headset USB connector to the power supply unit provided (230V), and then plug it into the power supply.
1.3 Connection to a stereo sound card
• Connect the green jack plug on the headset to the speaker output (usually green) on your sound card.
• Connect the pink jack plug on the headset to the microphone input (usually pink) on your sound card.
Cinch code
FR (red Cinch plug)
FL (white Cinch plug)
RR (red Cinch plug)
RL (white Cinch plug)
WF (red Cinch plug)
CE (white Cinch plug)
Connection on the DVD player
Front Right
Front Left
Rear Right
Rear Left
Subwoofer
Center
7