CIAT EREBA ACCESS 017 T Manuel D'instructions page 18

Minimum and maximum water flow rates in the
plate heat exchangers
Minimum flow rate, l/s
EREBA ACCESS 17 T
EREBA ACCESS 17 HT
EREBA ACCESS 21 T
EREBA ACCESS 21 HT
EREBA ACCESS 26 T
EREBA ACCESS 26 HT
EREBA ACCESS 33 T
EREBA ACCESS 33 HT
EREBA ACCESS 40 T
EREBA ACCESS 40 HT
(1) Maximum water flow rate with an available static pressure of 50 kPa (units with
hydraulic module)
Water circuit water content
Whatever the size of the system, the minimum content of the water circuit
is given by the following formula:
Content = CAP x N = Litres
(kW)
where CAP is the nominal system capacity (kW) at nominal operating
conditions of the installation.
Application
Air conditioning
Industrial process cooling
EREBA ACCESS 17 - 40 T/HT
Maximum flow rate
0.40 1.39
0.45 1.39
0.47 1.52
0.57 1.52
0.63 1.96
0.67 2.18
0.82 2.18
0.87 2.29
0.99 2.60
1.05 2.60
N
3.5
See note
(1)
, l/s
EN - 16