Description Of Symbols - GMC GMC18CS Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Introduction
Thank you for purchasing this GMC tool. This manual contains information necessary for safe
and effective operation of this product. This product has unique features and, even if you are
familiar with similar products, it is necessary to read this manual carefully to ensure you fully
understand the instructions. Ensure all users of the tool read and fully understand this manual.
Guarantee
To register your guarantee visit our web site at
www.gmctools.com and enter your details*.
Your details will be included on our mailing list (unless indicated otherwise) for information on
future releases. Details provided will not be made available to any third party.
GB
Purchase Record
Date of Purchase:
Model: GMC18CS
Serial Number:
(located on motor housing)
Retain your receipt as proof of purchase.
If registered within 30 days of purchase GMC guarantees to the purchaser of this product that
if any part proves to be defective due to faulty materials or workmanship within 24 MONTHS
from the date of original purchase, GMC will repair or, at its discretion, replace the faulty part
free of charge. This guarantee does not apply to commercial use nor does it extend to normal
wear and tear or damage as a result of accident, abuse or misuse.
* Register online within 30 days of purchase.
Terms & conditions apply.
This does not affect your statutory rights.
636575_Z1MANPRO1.indd 6
Original Instructions

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Wear protective shoes
Wear protective clothing
Be aware of kickback!
Warning: Sharp blades or teeth!
Dust extraction required or recommended
DO NOT use in rain or damp environments!
Do not touch the blades before the machine is disconected from the supply and
the blades have come to complete stop
WARNING: Moving parts can cause crush and cut injuries
Caution!
Important safety devices! Ensure correct function, maintain in accordance with
instructions and DO NOT disable!
Class II construction
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
Conforms to relevant legislation and safety standards.
6
13/01/2016 15:14

Publicité

Table des Matières
loading

Table des Matières