Add-On Modules; Technical Data - Danfoss Icon Master Controller 24 V Guide D'installation

Installation Guide

Add-on Modules

Technical data

12 | © Danfoss | FEC | 2017.06
Danfoss Icon™ Master Controller 24 V
You can extend the functionalities of Danfoss
Icon™ Master Controller 24V with Add-on Modules.
Radio Module
By adding a Radio Module the Danfoss Icon™ Mas-
ter Controller 24V is converted from a wired to a
wireless solution. The wireless solution provides a
higher degree of flexibility in placing the thermo-
stats. In a wireless system, each Master Controller
must have it's own Radio Module.
For more information, see the installation guide
supplied with the Radio Module.
Expansion Module
By installing an Expansion Module the Danfoss
Icon™ Master Controller 24V can be used with
more applications such as electronic mixing shunt
control or in cooling applications. Just install the
Expansion Module, choose the appropriate appli-
cation from a list and make the wiring according
to the description - then the configuration is made
automatically.
For more information, see the installation guide
supplied with the Expansion Module.
Common characteristics, all Danfoss Icon™-products
Temperature for the ball pressure test
Control polution degree
Software class
Rated impulse voltage
Operating time
Temperature range, storage and transportation
Dispossal instructions
Full data sheet available at www.danfoss.com
Radio Module & Repeater
Purpose of control
Ambient temperature range, continious use
Frequency
Transmission power
Encapsulation (IP Class)
Conformity declared acc. to following directives
Protection class
Supply voltage
App Module
Purpose of control
Ambient temperature range, continious use
Frequency
Encapsulation (IP Class)
Conformity declared acc. to following directives
Protection class
Supply voltage
App Module
By adding an App Module to Danfoss Icon™ Mas-
ter Controller 24V the system enables app support
for control via smart phones (supports IOS and
Android). For more information, see the installa-
tion guide supplied with the App Module.
Repeater
Add a repeater in
large buildings where
added wireless range
is needed. Set Master
Controller to INSTALL
mode to add a re-
peater.
For more information,
see the installation
guide supplied with
the Repeater.
75 °C
Degree 2, normal household environment
Class A
4 kV
Permanently connected
-20 to + 65 °C
The product must be disposed as electronic waste.
Transmitting and receiving device
0 to + 40 °C
869 MHz
<2.5 mW
IP 20
RED, RoHS, WEEE
Radio: Class III Construction Repeater: Class II Construction
Radio: 5 VDC Repeater: 230 VAC 50/60 Hz
Wi-Fi transmitting and receiving device, incl. Bluetooth
0 to + 40 °C
2.4 GHz
IP 20
RED, RoHS, WEEE
Radio: Class III
5VDC
Repeater
088U1102
VIMCG20F / 088N3678