Machine Components; Accessories; Care Treatments / Refreshing Oiled Surfaces With Osmo Maintenance Oil Or Topoil - Osmo HANDXCENTER Manuel D'instruction

2. Machine components

1. Motor casing
2. Handle
3. On/off switch
4. Power cable
5. Hook and loop fastener disc for pad

3. Accessories

The following accessories are sold separately.
1. Distribution pad white (Ø 218 mm)
Osmo Art. No.: 14000264
2. Drive disc
Osmo Art. No.: 14000263
Note
Never leave Osmo HandXcenter standing on the distribution pad after use. The one-
sided distribution of the machine weight presses down on the pad and smooth machine
operation is no longer possible. In such cases, the pad must be replaced.
4. Care treatments / Refreshing oiled surfaces with
Osmo Maintenance Oil or TopOil
First clean the surface with Osmo
>
Intensive Cleaner
When the surface is completely dry,
>
apply Osmo Maintenance Oil or
Osmo TopOil directly to the wood
surface.
Attach a white pad to the hook and
>
loop fastener disc
Buff the surface with a white pad
>
Attention: Streaking means there is too much product on the surface.
Either turn the pad over or run the pad over untreated wood until dry.
12
1 2