Indirect Measurement; Calculating Measured Values; Subtracting Measured Values - Testboy TV 610 Mode D'emploi

Indirect measurement

A length (e.g. the height of an object) can be calculated indirectly using the Pythagoras function.
The object height (opposite leg) is calculated using the distance to the highest point of the ob-
ject (hypotenuse) and the horizontal distance to the object (adjacent leg).
To this end, you can choose between two-point measurement (with horizontal measurement of
the deepest object point) or three-point measurement (when the lowest object point is located
at a low height).

Calculating measured values

Addition of measured values
To add measured values, proceed as follows:
After determining a measured value, press the (D)
displayed in the upper-most row.
Determine the next measured value by pressing the measuring button. This is displayed in the
second row.
The sum of the measured value is displayed in the lowest row.
1

Subtracting measured values

To subtract measured values, proceed as follows:
After determining a measured value, press the (J)
displayed in the upper-most row.
Determine the next measured value by pressing the measuring button. This is displayed in the
second row.
The difference of the measured values is displayed in the lowest row.
1
TV 610
2
►
2
►
button. The measured value is saved
3
►
button. The measured value is saved
3
►
Operation
23