Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
HE120 BY-PASS DRUM HUMIDIFIER
Fig. 24. Correct Float Valve position.
FLOAT VALVE
WASHER
(RECESSED SIDE)
Fig. 25. Re-installing Float Valve.
7. Insert the Valve Hole Plug in the "D" hole on the oppo-
site side of the Float Valve. See Fig. 26.
Fig. 26. Installing Valve Hole Plug.
69-1860EF—01
MOTOR
FLOAT VALVE
M13626
HUMIDIFIER
HOUSING WALL
FLOAT VALVE
RETAINING NUT
FLOAT VALVE STEM
M13616
VALVE HOLE PLUG
M13627
12
8. Insert the Drain Fitting into the bottom of the Humidifier
on the same side as the Bypass Duct. See Fig. 27.
DRAIN
FITTING
Fig. 27. Installing Drain Fitting.
9. Place the Water Pan in the Humidifier Housing so Over-
flow Tube is above previously installed Drain Fitting.
See Fig. 28.
OVERFLOW
TUBE
DRAIN FITTING
(UNDERNEATH HUMIDIFIER HOUSING)
Fig. 28. Installing Water Pan.
10. Install Humidifier Drum by inserting motor coupling end
first, then snapping it into the bearing. See Fig. 29.
Fig. 29. Installing Humidifier Drum.
FLOAT
M13628
M13629
MOTOR
M13630
Publicité
Table des Matières
