Grease Bucket - CampChef PG24MG Mode D'emploi

INSTALL SHELF
(Optional-Do not install if installing sear box)
1. Install shelf as shown in Fig 6.
2. Tighten all hardware

GREASE BUCKET

1. Hang grease bucket from tube as shown in Fig 7.
ASH CUP
1. Install Ash Cup as shown in Fig 7. Never use grill without
Ash Cup in place.
ASH CUP
INSTALL DRIP TRAY
1. Install the Drip Tray as shown in Fig 8 and Fig 9.
Fig. 6
M6 X 15 SCREW
PG24-11 (1)
GREASE BUCKET
PG24-1 (1)
GREASE BUCKET
UPPER RACK
PG24-70 (2)
COOKING GRATE
Fig. 7
PG24SG-4 (1)
DRIP TRAY
Fig. 8
PG24SG-4 (1)
DRIP TRAY
PG24SG-2 (1)
HEAT DEFLECTOR
CLEANOUT PORT CLOSED
Fig. 9
WARMING RACK AND COOKING GRATE
1. Install the cooking grate as shown in Fig 10.
CLEAN-OUT KNOB ASSEMBLY INSTALLATION
Hand tighten the burner clean-out knob as shown in Fig 11.
CLEAN-OUT PORT KNOB
1. Clean-out Port knob must be pushed in when grill is on.
Make sure pullout lock is pushed down and locks the
knob to prevent inadvertent opening of the clean-out port.
See Fig 12.
2. Lift pullout lock and pull clean-out port knob to empty
ash into ash cup. See Fig 13
3. See instructions for burner clean-out.
PG24-1 (1)
UPPER RACK
PG24-70 (2)
COOKING GRATE
PG24-1 (1)
Fig. 10
UPPER RACK
PG24-70 (2)
COOKING GRATE
PG24-9 (1)
BURNER PULLOUT KNOB
Fig. 11
CLEANOUT PORT CLOSED
Fig. 12
PG24SG-4 (1)
DRIP TRAY
CLEANOUT PORT CLOSED
PG24SG-2 (1)
HEAT DEFLECTOR
Fig. 13
CLEANOUT PORT OPEN