ohmex HET 4530 FIRE Manuel D'utilisation page 96

EN
> > Instruction for use
When installation it's over, connect the power plug to the power socket.
Make sure that the supply voltage corresponds with the data
indicated on the appliance nameplate.
- Turn the appliance on by pressing the switch (6) on "I" (ON) ; the appliance emits a
"beep" indicating that it's electrically powered.
- The appliance can be started both by the remote control (10) and by the buttons (7, 8
and 9) in the structure (3) upper part.
Control through the buttons
- Button "0/I" (ON/OFF) (7)
- Press the button once to turn the appliance and the fire effect on; the corre-
sponding red led turns on.
- Keep the button pressed for 3 second to enter the "dimmer" mode. Keep the
button pressed to set the desired brightness.
- Press the button a second time to turn the appliance and the fire effect off.
- Button "900W" (8)
- Press the button once to set the minimum heat function (900W).
- Press the button a second time to stop the function.
- Button "1800W" (9)
- Press the button once to set the maximum heat function (1800W).
- Press the button a second time to stop the function.
92
USE
HET 4530 FIRE
1800W 900W
9
8
6
I/0
7