Safety Information For The Power Adaptor; Assembly Instructions; Assembly Of The Dartboard - Crivit DS-5478 Règles Du Jeu Et Mode D'emploi

• Take care to position or set up the
item in an inaccessible place when
in use.
• Do not mount onto doors!
• Metal tips may not be used at all!
Preventing damage to the item!
• Use only appropriate replacement
tips, to prevent the darts from
ricocheting from the dartboard.
Long tips are not recommended
for electronic dartboards.
They bend or break easily
(removal of broken tips from the
dartboard – error messages).
• Do not expose the item to adverse
weather conditions or extreme
temperatures.
• Protect the item from wet and moist
conditions. The electronics may be
damaged.
Safety information for the
power adaptor
CAUTION!
Important information for the
use of the power adaptor!
Note: The equipment warms up
during normal operation.
• Only use the power adaptor for
Dartboard DS-5478/DS-5479.
• Use only original adaptor!
• Use only original replacement
parts in case of malfunctioning
parts!
All manuals and user guides at all-guides.com
• Unplug the power adaptor
from the mains power before
disconnecting the power adaptor
from the dartboard.
• The power adaptor is only suitable
for indoor use. Keep away from
moisture.
• Don't continue using the power
adaptor when the cover or supply
cable have been damaged.
• Disconnect the item from the mains
when not in use for an extended
period.
• The output cable must not be short-
circuited.
• The outer connection cable of this
transformer cannot be replaced;
if the cable is damaged, the
transformer should be disposed of.

Assembly instructions

Assembly of the dartboard

(Fig. B and C)
1. Select an appropriate location, with
approx. 3m free space.
2. The throw-off point is about 2.37m from
the dartboard. Mount the dartboard to the
wall in such a way that the mid-point of the
bullseye is around 1.73m from the ground.
3. Mark the relevant drill holes with
a pencil, using the drill template
included. The markings "+" designate
the dartboard's mounting bracket. The
markings "O" designate openings on
the dartboard, to facilitate the long-term,
stable wall-mounting.
4. Either mount the dartboard onto the
mounting bracket (13) (3 screws) or onto
the permanent wall mount (12) (4 screws).
GB/IE/NI 9