Troubleshooting; Storage, Cleaning - Crivit DS-5478 Règles Du Jeu Et Mode D'emploi

Troubleshooting

No power
Ensure that the power adaptor is plugged
into a mains power source, and the power
adaptor connection is plugged into the
connection plug on the dartboard.
No results
Check whether the game is in "settings" or
"pause" mode. Check whether any buttons
or displays fields are stuck.
Stuck display elements or stuck
function buttons
During the transport, or during normal
operation of the dartboard, the display
elements may get stuck temporarily, and
results are no longer shown.
A warning signal is emitted, and a display
light flickers, indicating the stuck element.
Gently pulling out the dart from the relevant
element, or flicking the element back and
forth with a gentle pressure usually frees
the relevant element quickly. The game
can then be continued, and the results are
displayed exactly where it was interrupted.
Removing broken dart tips
Soft tips are safe, but they don't last
forever. If a tip breaks off, and is stuck
in the dartboard, try to remove it with
an appropriate pair of pliers. If a tip is
broken off ad is so short that you it does
not protrude from the dartboard, it can be
pushed out through the opening on the
dart plate. The soft tip cannot damage
the electronics behind the element. To
accomplish this step, we do, however,
expressly recommend using an undamaged
soft-tip dart. Never push a short, broken-
off tip through the dartboard with a sharp
metal object, as a metal object can easily
damage the plate, if it's inserted into the
dartboard too deeply.
All manuals and user guides at all-guides.com
The heavier the dart, the more apparent the
danger of the tip breaking off.
Power fluctuations or electro-
magnetic disruptions
In extreme situations, when massive electro-
magnetic disruptions occur, the electronics
may cease to function, or may deliver
incorrect results.
Examples:
Heavy thunderstorms, extreme power
fluctuations, lack of tension, or if the
dartboard has been installed too close to
electric engines, or micro-wave ovens.
In order to restore normal functioning, the
network power adaptor must be separated
form the power network for several
seconds, then reconnected. You should,
of course, ensure that the cause of the
disruption has been fixed.

Storage, cleaning

IMPORTANT! Remove the mains
plug from the socket before
cleaning the product.
Only clean the dartboard with a
moist cloth! The network adaptor
may not come into contact with
moisture!
Repeated use of the item mainly causes
dirt on the front side, due to touching with
fingers. Clean the front, the buttons and the
windows with a moist cloth.
As a solvent, we recommend water with
a little dishwashing product. Afterwards,
dry off with a soft, dry cloth. For extended
periods of non-use, cover the item with a
cloth, to protect it form dust.
When not in use, always store the product
clean and dry at room temperature.
IMPORTANT! Never clean the product with
harsh cleaning agents.
GB/IE/NI 19