Preparation Of Coffee; Distribution Of Hot Water; Distribution Of Steam - Isomac ZAFFIRO Notice D'emploi Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

• switch off the machine with the main circuit breaker (1)
• unplug it
• fill the tank with water
• plug in the power cable
• switch on the machine with the main circuit breaker (1)

4.2 Preparation of coffee

! Make sure the tank is always full of water
• make sure the machine is pressurized (see paragraph 4.1)
• fill a one cup filter holder (4) if you want one cup of coffee or a two cup filter
holder if you want two cups at the same time, and press the coffee slightly with
the presser
• fit the filter holder (4) in the coffee distribution unit (3) and twist from left to right
to block it in place
• place one or two cups under the filter holder (4)
• push the coffee lever (12) up. Coffee will come out the bottom of the filter holder (4)
• lower the lever (12) when you have enough coffee
• if you want to make more coffee remove the filter holder (4) by turning it from
right to left

4.3 Distribution of hot water

! Always make sure the tank is full of water
! never place your hands or other parts of the body in the path of the water/steam
nozzle. Hot water and steam can cause serious burns
• make sure the machine is pressurized (see paragraph 4.1)
• place a container under the steam/ hot water nozzle (9)
• turn the steam/hot water tap knob (8) counter-clockwise
• press the hot water switch (6). Hot water at about 95°C will come out of the bot
tom of the steam/hot water nozzle (9)
• turn the steam/hot water nozzle (8) clockwise
• press the hot water switch (6) again when you have enough hot water

4.4 Distribution of steam

! Always make sure the tank is full of water
! never place your hands or other parts of the body in the path of the water/steam
nozzle. Hot water and steam can cause serious burns
• make sure the machine is pressurized (see paragraph 4.1)
• place a container under the steam/ hot water nozzle (9)
• press the steam switch (13). The steam light (14) and the hot water light (7) will
both light up together
• wait about 30 seconds
• immerse the water/steam nozzle (9) in the liquid to be heated
• turn the knob on the steam/hot water tap (8) counter-clockwise
• steam will come out of the bottom of the steam/hot water nozzle (9)
• heat the liquid with the steam
• turn the knob on the steam/hot water tap (8) clockwise
• press the steam switch again (13)
14
and empty out the used grounds. Repeat the above operations
to stop the steam

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Amica

Table des Matières