Kress Robotik Mission NANO KR101E Notice Originale page 11

Mission NANO can be charged manually without
TM
the boundary wire.
1. Connect the charging base to a suitable power
supply. The green light on the charging base will
turn on.
2. Manually dock the Mission
charging base while the Mission
powered off.
3. The green light on the charging base will be
flashing. Mission NANO will begin to charge.
TM
4
Winter Hibernation
Your Mission NANO will live longer and healthier if it is allowed to hibernate. So even though it is tough, we
TM
recommend storing your Mission
Before you prepare your Mission
• Thoroughly clean your Mission
• Fully charge the battery
• Turn the power off
To maximize the battery life, fully charge the battery before storage during winter.
WARNING: Protect the underside of Mission
upside down outdoors.
The boundary wire can be left in the ground although its ends should be protected, such as placed in a tin can
with grease. If the charging base is left outside for the winter, leave the boundary wire connected.
NOTE: When bringing the Mission
and contact pins are clean. We recommend using a fine grade emery cloth to clean the contacts. Using the
app, make sure the date and time are correct and send Mission
5
Replacing the battery
WARNING: Power off before attempting any adjustment, replacement or repair.Before
replacing the blades, turn your Mission
If you need to replace the battery, follow these
steps:
1. Gently turn your Mission
2. Remove the screws on the battery cover.
Remove the battery cover.
NANO into the
TM
NANO is
TM
NANO in your shed or garage during the winter.
TM
NANO for winter hibernation, we recommend you:
TM
NANO
TM
NANO back to work after winter hibernation, make sure the charging strips
TM
TM
NANO upside down.
TM
NANO from water. NEVER store Mission
TM
NANO back to what it loves doing: mowing.
TM
NANO OFF and put on protective gloves.
NANO
TM
11
EN