Routine Maintenance; Heat Dissipation Requirements; Cleaning & Maintenance - Mi Smart M055MGN Mode D'emploi

Routine Maintenance

Heat Dissipation Requirements

Inlet
Cleaning & Maintenance
16
Outlet
Inlet
Turn off and unplug the projector before cleaning.
Gently wipe the projector's housing and lens with a suitable cleaning cloth, periodically.
Do not use any abrasive cleaning products, solvents, chemicals, or other rough objects
so as to avoid scratches or corrosion.
Note:
- This projector is not water resistant. Do not allow any liquid to get into the projector's
power indicator, air vents, connection ports, and speaker grilles.
- Only use a cleaning cloth that is suitable for cleaning lenses.
Note: Avoid touching the heat dissipation
vent on the rear, as it can become very hot.
Note:
Do not place any objects within 20 cm of the projector's
air vents, as this will affect the heat dissipation effect.