Quick Start Guide; Pairing The Remote - Mi Smart M055MGN Mode D'emploi

Quick Start Guide

Pairing the Remote

After installing the batteries
in the remote control, press
the OK button to start pairing.
Note: Keep the remote control within 20 cm of the projector during the pairing process.
Point the remote at the bottom right corner of
the projector, then simultaneously press and hold
the return and the app button. Once you hear
a beep, it indicates that the pairing process has
started. Release the buttons and wait for the
process to complete.
"Remote paired successfully" will appear
on the projection screen to indicate the
remote was paired with the projector
successfully.
13