Publicité
Les langues disponibles
Les langues disponibles
Mount Wall Cover to a Vertical 2 in. X 4 in. Electrical Box (See Fig. 3)
1. Position the bracket on the electrical box with the arrow pointing up. Insert two #6-32 X 5/8" flat head screws.
Level the bracket and tighten the flat head screws.
2. Position the wall plate on the wall cover using the 4 mounting posts and snap them together.
3. Pull the wires through the wire hole on the wall cover / wall plate assembly. Position the assembly on the bracket.
4. Insert two #6-32 X 3/8" pan head screws. Check leveling, if desired, and tighten the pan head screws.
Fig. 3. Mount bracket, wall cover, wall plate and thermostat to a vertical 2 in. X 4 in. electrical box.
ELECTRICAL
BRACKET
BOX
#6-32 X 5/8 FLAT
HEAD SCREWS (2)
WIRE
WALL
MOUNTING HOLES (2)
COVER
WIRE HOLE
MOUNTING POSTS (4)
L
K
G
C
AUX
W
Y
2
a
O/B
W
Y
Universal
U
R
1
Hum
Dehum
U
R
Vent
2
C
1 Wire
2 Wire
3
LYRIC INSTALLATION
WALL PLATE
MOUNTING HOLES (2)
WIRE HOLE
#6-32 X 3/8" PAN
HEAD SCREWS (2)
THERMOSTAT
M35408
33-00069EFS—01
Publicité
