Publicité
Les langues disponibles
Les langues disponibles
TRINOXFLEX BME 18.0-EC + LK 152 / + BR 50 / + BF 140 / + BS 50
Never place the power tool down before
the tool/attachment has come to rest
completely. If the tool/attachment is still
rotating, it could come into contact with
the surface and cause loss of control over
the power tool.
Never leave the power tool running while
carrying it. Your clothing could be caught
through accidental contact with the rotat -
ing tool/attachment and the tool/attach -
ment could cut into your skin.
Clean the ventilation slots of the power
tool regularly. The motor fan draws dust
into the housing and a heavy build-up of
metal dust could pose an electrical hazard.
Do not use the power tool in the vicinity of
combustible materials. Sparks could set
these materials alight.
Do not use tools/attachments that require
liquid coolant. The use of water or other
liquid coolants could cause electric shock.
Special safety notices for sanding/grinding
Only use abrasives approved for your
power tool and the protective hood de -
signed for these abrasives. Abrasives
that are not designed for the power tool
cannot be adequately shielded and are
unsafe.
Abrasives may only be used for the rec -
ommended applications. For example:
Never sand with the side of a diamond
sanding plate. Diamond sanding plates
are designed to abrade material with the
underside of the sanding plate. Force im -
parted on the side could cause disintegra -
tion of the abrasive plate.
Only ever use undamaged clamping
flanges of the correct size and shape for
the selected tool/attachment. Suitable
flanges support the tool/attachment and
in doing so reduce the risk of breakage.
Do not use worn tools/attachments from
larger power tools. Tools/attachments
from larger power tools are not designed
for the higher speeds of smaller power
tools and could break.
Safety notices for power tools with
burnishing attachment
WARNING!
Read all safety notices and instructions.
Failure to comply with the safety notices and
instructions may result in electric shock, fire
and/or serious injuries . Keep all safety
notices and instructions in a safe place for
future reference.
Common safety notices for polishing
and working with a wire brush
This power tool is intended for polishing
and for working with a wire brush. Ob -
serve all of the safety notices, instructions,
diagrams and specifications included with
the tool. Failure to heed the following in -
structions may result in electric shock, fire
and/or serious injury.
This power tool is not suitable for grinding
and cutting. Hazards and injuries can en -
sue if the power tool is not used in the
way intended.
Do not use accessories other than those
specifically provided and recommended
by the manufacturer for this power tool.
Just because an accessory can be at -
tached to the power tool does not mean
that it is safe to use.
The approved speed of the tool/attach -
ment must be at least as high as the max -
imum speed specified on the power tool.
Accessories that rotate faster than permit -
ted could disintegrate and broken parts
could fling off at speed.
The outside diameter and the thickness of
the tool/attachment must be within the ca -
pacity rating of the power tool. Tools/at -
tachments of the wrong size cannot be
shielded or controlled sufficiently.
Threaded tools/attachments must match
the thread of the spindle exactly. For tools/
attachments that are mounted by means
of a flange, the hole diameter of the tool/at -
tachment must fit the locating diameter of
the flange. Tools/attachments that cannot
be properly secured to the power tool will
rotate unevenly, vibrate heavily and could
result in loss of control.
25
Publicité
