Makita DML812 Manuel D'instructions page 5

• Do not expose a battery pack or appliance to
fire or e cessive temperature.
or temperature above 130°C (265°F) may cause
explosion.
• Follow all charging instructions and do not
charge the battery pack or appliance outside
of the temperature range specified in the
instructions. Charging improperly or at temperatures
outside of the specified range may damage the
battery and increase the risk of fire.
ave servicing performed by a ualified repair
•
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
• Do not modify or attempt to repair the appliance
or the battery pack except as indicated in the
instructions for use and care.
o not dispose of the battery ies in a fire. The
•
cell may ex p lode. Check with local codes for possible
special disposal instructions.
• Do not open or mutilate the battery(ies). Released
electroly t e is corrosive and may cause damage to the
ey e s or skin. It may be tox i c if swallowed.
• Do not charge battery in rain, or in wet locations.
• Do not handle charger, including charger plug,
and charger terminals with wet hands.
• Do not charge the battery outdoors.
8. The light source contained in this luminaire shall
only be replaced by the manufacturer or his
service agent or a similar ualified person.
posure to fire
1. Before using battery cartridge, read all
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
4. If electrolyte gets into your eyes, rinse them out
5. Do not short the battery cartridge:
6. Do not store the tool and battery cartridge in
7. Do not incinerate the battery cartridge even if it
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. The contained lithium ion batteries are subject to
11. When disposing the battery cartridge, remove
12. Use the batteries only with the products
13. If the tool is not used for a long period of time,
5 English
Important safety instructions for
battery cartridge
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
shorter, stop operating immediately. It may result
in a risk of overheating, possible burns and even
an explosion.
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current
flo , overheating, possible burns and even a
breakdown.
locations where the temperature may reach or
exceed 50 °C (122 °F).
is severely damaged or is completely worn out.
he battery cartridge can e plode in a fire.
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on packaging
and labeling must be observed.
For preparation of the item being shipped, consulting
an ex p ert for haz a rdous material is required.
Please also observe possibly more detailed national
regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move around
in the packaging.
it from the tool and dispose of it in a safe place.
Follow your local regulations relating to disposal
of battery.
specified by Makita. Installing the batteries to non-
compliant products may result in a fire, e cessive
heat, ex p losion, or leak of electroly t e.
the battery must be removed from the tool.