Solvis Cala 254 Notice De Montage page 5

4.3 Edge and Corner Areas
Increased static loads occur at the edge area of the roof.
CAUTION
Observe the minimum edge spacing
• On flat roofs, all superstructures should maintain
a minimum spacing of 1 m to the edge of the
roof.
Fig. 3: Minimum spacing to edge of building
SOLVIS MAL-C-FDS-W-A · Technische Änderungen vorbehalten · 30906-3a
Cala 254 Horizontally Flat Roof Holders Installation Guide EN
4.4 Structural Design
For additional information on statics, dimensions,
etc., see the
collector.
installation instructions for the
5