First Use; System Operation - Holmatro CT 5111 Mode D'emploi

EN
Description
Carrying Harness
Carrying/Storage bag
Set pulling attachments +
spreading tips
/i
Description
Pulling Attachments Set
Pulling Chains Set
Carrying Harness
Carrying/Storage bag
Set pulling attachments +
spreading tips
4

First use

4.1 General
• Check the equipment for completeness and damage. Do not use the equipment if it is damaged;
in that case contact the Holmatro dealer.
• Check the operation of the deadman's handle. The handle must return to the neutral position when
you release it.
4.2 Installing the battery for the LED light
See Fig. 13.
The battery for the LED light is placed in the carrying handle. This battery has a working life of ± 6
hours.
• Remove the cover (C) by unscrewing both screws (B).
• Install the battery (A) in the battery holder of the carrying handle.
• Re-install the cover and fasten the screws.
5 Operation
5.1

System operation

5.1.1 General
A system is an assembly of a hydraulic pump, hose(s), and one or more tools.
The hydraulic pump is driven by an internal combustion engine, electric motor, pneumatically or by hand
or foot power. This pump displaces hydraulic oil and is capable of building up pressure. The hose is for
transporting the hydraulic oil between the pump and the tool.
The tool has a hydraulic cylinder containing a piston that can move axially. If the cylinder is pumped full
from the bottom, pressure builds up beneath the piston so that it is pushed to the outside. If the cylinder
is pumped full from the top, the piston is forced back into the cylinder.
38
All manuals and user guides at all-guides.com
CT 5111 (RH) CT 5111 ST
CT 5114 (RH) CT 5114 ST
- 150.553.115
- 150.182.227
-
CT 5150 CT 5160 (ST)
150.182.078 150.182.078
150.582.261 150.582.261
-
-
150.182.365 150.182.365
916.001.554_003
CT 5117 (RH)
-
-
- -
-
-
CT 5117 ST
150.553.115
150.182.227
-
CT51** (RH)(ST)