Holmatro CT 5111 Mode D'emploi page 33

• Stop immediately if the equipment leaks oil. Oil escaping under pressure can penetrate the skin and
cause serious injury. Go immediately to a hospital with a person who is injected with oil for medical
help. Give a specification of the oil to the medical staff.
• Return inactive equipment immediately to the tool station.
• Always adhere to the safety regulations that apply to other equipment that is used in the operation.
2.7 Safety regulations with respect to maintenance
• Wear personal means of protection when performing maintenance tasks.
• Never work in a way that could jeopardize safety.
• Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
• Make sure that moving parts do not move unexpectedly.
• Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in an environmentally responsible way.
3 Description
3.1 Equipment
The combi tool is one of the pieces of rescue equipment that makes it possible to reach victims. It is a
versatile combination tool with the function of a cutter and spreader in one tool. This tool is used during
rescue operations to cut, spread, squeeze or pull structural elements. It can squeeze material tightly or
squash it and thus create weak pivots or places that are easier to cut later. It can also force parts apart
or be used to notch at particular places in order to weaken the construction. By placing accessories at
the points, materials can be pulled together. The combi tool is produced as a hand tool that can be
operated by one person. One or more hoses connect the tool to a pump. On the front of the tool there
are two blades with spreading tips that make a scissor or spreading movement. The high hydraulic
pressure that is used means these tools can apply large forces.
3.1.1 Type designation
Example: CT 5111 ST
/i
Digit Example
1-2 CT
3-6 5111
7-8 ST
3.2 Product identification (Fig. 2)
/i
1 Spreading tips
2 Blade
3 Carrying handle
4 Carrying handle locking knob
5 Deadman's handle
6 Overpressure relief valve
CT51** (RH)(ST)
All manuals and user guides at all-guides.com
Description
CT = Combi tool
Type indication
ST = Special Tactics
RH = Rotatable Handle
916.001.554_003
7 Core coupler
8 Switch (light)
9 Light
10 Cover
11 Carrying handle locking bar
12 Blade cutting edge
EN
33