Securing Your Baby - Graco Deluxe Serie Manuel D'utilisation

33
Look straight on at the level indicator
to check it. If the level indicator shows
ONLY blue, then the safety seat is
properly leveled.
If the safety seat is too upright or too
reclined showing any orange in the
level indicator, shift the car seat until
level indicator shows ONLY blue.

Securing your baby

34
Step 1.
Drape harness straps over
seat back. Place baby in seat. (Make
sure baby's back and bottom are flat
against seat.)
35
Step 2.
Fit the two shoulder strap
buckle parts together.
36
Step 3.
Push the now mated shoulder buckle
parts into the buckle housing until you
hear it click home. CHECK that
buckle is secure.
DO NOT allow harness
straps to become twisted. Keep
them flat against your baby's body.
37
Step 4.
To tighten the harness, pull the slack
adjustment strap in front of seat.
CHECK that harness is snug. You
should not be able to insert more
than two fingers between the
harness and your baby.
Step 5.
To open the harness,
If handle is up, move it to a down
position.
38
Press red button on buckle to open
harness.
30