Fitting The Harness - Graco Deluxe Serie Manuel D'utilisation

Fitting the harness

Before using the car seat, check that
the harness is properly adjusted for
your baby's size.
Step 1.
Properly dress your baby. Use
clothing with legs so crotch strap can
be securely latched.
Step 2.
Put your baby in the seat. Make sure
that baby is sitting with back and
bottom flat against the seat as shown.
5
Correct
6
Incorrect—space behind back and
bottom
Step 3.
Check that harness straps are set at
the proper height. Straps must go into
the harness slots nearest to your
baby's shoulders but not above the
shoulder line.
7
Correct
8
Incorrect
DO NOT use upper harness slots
with a small infant. The harness
may not securely hold a small
baby in a crash.
9
Step 4.
To change harness slots, first remove
your baby. Depress the harness
adjustment button at the front of the
seat and pull on the harness to
slacken it.
10
Step 5.
Behind the seat, take the shoulder
strap ends off the metal junction plate
and pull the straps through the slots
in the seat. Insert them into the
appropriate set of slots. Reassemble
the strap ends onto the junction plate.
The ends of the harness straps have
two loops.
24