Setting And Storing Personal Data In Memory; Taking Body Composition Readings - Tanita InnerScan BC-545 Mode D'emploi

Impédancemètre
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB

SETTING AND STORING PERSONAL DATA IN MEMORY

You will receive readings only if data has been programmed into one of the personal data
memories or the Guest mode.
The monitor can store personal details for up to 4 people.
1. Turn on the Power
Press the Set button to turn on the unit (once programmed, tapping a Personal Key turns
SET
on the unit.) The unit will beep to confirm activation, the Personal Key numbers (1,2,3,4)
will be displayed, and the display will flash.
Note: If you don't operate the unit for sixty seconds after the unit has been turned on, the unit will
turn off automatically.
Note: If you make a mistake or want to turn the unit off before you have finished
programming it, press the Weight-Only Key (
2. Select a Personal Key Number
Press the Up/Down buttons to select a Personal Key. Once you reach the Personal Key
number you wish to use, press the Set button. The unit will beep once to confirm.
3. Set your Birthday
Set the date of your birthday (Year / Month / Day) using ▲ or ▼ buttons. Press the SET
button to confirm at each programming.
The unit will beep once to complete the programming.
Note: The age range is 5 – 99 years old.
4. Select Female or Male
Use the Up/Down buttons to scroll through Female ( ) or Male ( ), Female/Athlete
( /
) and Male/Athlete ( /
press the Set button.
The unit will beep once to confirm.
Athlete Mode : See explanation for use on P.1.
5. Specify the Height
The display defaults to 5' 7.0" (170cm) (range of user is from 3' – 7' 3.0" or 90cm – 220cm).
Use the Up/Down buttons to specify Height and then press the Set button.
The unit will beep twice and your programmed data will be displayed to confirm.
The power will then shut down automatically.
Note : When you change the birthday and/or gender, the unit will show "CLEAR".If you select "YES" using
Up/Down buttons, the existing personal data and tracking data will be deleted. If you select "NO" using
Up/Down buttons, no new data will be saved (existing data will be unchanged) then the unit will be shut off.
4
) to force quit.
) settings, then

TAKING BODY COMPOSITION READINGS

1. Select Personal Key and Step On
Using your toe, tap your pre-programmed Personal Key.
The unit will beep and the display will show the programmed data.
The unit will beep again and the display will show "0.0". Now pull out the
hand-electrodes, hold with arms straight down and step onto the platform.
Note: Remember no shoes or socks.
The display will show in the order below during the body fat % measurement.
The unit will beep twice to complete the measurement.
a
a
a
Note:
Please grip the hand-electrode as shown.
Place your hands on your side, and do not move until measurement is completed.
If you step onto the platform before "0.0" appears, the display will show "Error" and you will not
obtain a reading.
Furthermore if you do not step onto the platform within about 60 seconds after "0.0" appears, the
power is shut off automatically.
2. Get Your Readings: Auto Display Process
After the measurement is taken, the display will automatically show the current result with
the date and LED icon guide displaying Total Body Fat % and Weight (alternately 6 times)
(Please refer "Daily, Weekly and Monthly Graph Function" about the graph.)
Please step off from the scale.
Note: After displaying result. The unit will automatically shut off.
If you press button(s) while the current result is being displayed, the following information will appear.
If there is significant difference between the current and previous results, "SAVE?" will be displayed. You can select "YES" or
Note:
"NO" using arrow buttons.
YES: The current result will be stored.
NO: The current result will not be stored.
Note: If your age reaches 100 years old or more, the only weight result will be displayed.
And the "AGE ERROR" will appear on the display when you press feature buttons except the weight button.
Note: For children (age 5-17), the unit will only display the Weight and the Body Fat %.
Body Fat %:
Applicable age: 5-99.
Press icon botton continually to display, reading in the order listed bellow.
GB
a
90°
5

Publicité

Table des Matières
loading

Table des Matières