EIBENSTOCK EBM 352/3 Notice Originale page 31

EU - Declaration of Conformity
We declare under our sole responsibility that the product described under
"Technical Data" is in conformity with the following standards or
standardization documents:
EN 62841-1, EN 62841-3-6, EN 55014-1, EN 55014-2, EN 61000-3-2,
EN 61000-3-3, EN 50581
according to the provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EG
Technical file (2006/42/EC) at:
Elektrowerkzeuge GmbH Eibenstock
Auersbergstraße 10
D – 08309 Eibenstock
Lothar Lässig
General Manager
01.06.2022
GB - Declaration of Conformity
We declare as the manufacturer under our sole responsibility that the product
described under "Technical Data" fulfi lls all the relevant provisions of the
following Regulations S.I. 2008/1597 (as amended), S.I. 2017/1206 (as
amended), S.I. 2012/3032 (as amended) and that the following designated
standards have been used:
BS EN 62841-1, BS EN 62841-3-6, BS EN 55014-1, BS EN 55014-2
BS EN 61000-3-2, BS EN 61000-3-3, BS EN 50581
Technical file (S.I. 2008/1597) at:
Elektrowerkzeuge GmbH Eibenstock
Auersbergstraße 10
D – 08309 Eibenstock
Lothar Lässig
General Manager
01.06.2022
Subject to change without notice.
Frank Markert
Head of Engineering
Frank Markert
Head of Engineering
31