Napoleon MIRAGE 730 Instructions De Montage Et D'utilisation page 19

10 x
N570-0073 (1/4-20 x 3/8")
Assembling End Caps to Side Shelf / Side Burner
11
Peel protective coating from side shelf / side burner. Attach corresponding end
cap as shown using (5) 1/4-20 x 3/8" screws.
Bend Tabs on front of shelf up with a flat head
screw driver, insert screw through tab and into
end cap.
4 X
N570-0082 (1/4-20 x 5/8")
12
Side Shelf Installation
Insert (4) 1/4-20 x 5/8" screws through washers into threaded holes in side of
base, do not tighten all the way. Slide assembled side shelf over screw heads
and finish tightening.
4 X
N735-0001 (1 1/16" insulated washer)
19