LawnMaster BL705 Manuel D'utilisation page 8

ELECTRICAL INFORMATION
Make sure your extension cord is properly wired and in good electrical condition.Always replace a
damaged extension cord or have it repaired by a qualified person before use.
Keep extension cords away from sharp objects,excessive heat and damp or wet areas.
Use a separate electrical circuit for your tools. This circuit should comprise a wire of at least 12
gauge and should be protected with a 15 A time-delayed fuse. Before connecting the motor to the
power line, make sure the switch is in the OFF position and the electric current is identical to that
stamped on the motor nameplate. Running at a lower voltage will damage the motor.
WARNING:
ALTHOUGH THIS TOOL IS DOUBLE INSULATED, THE EXTENSION CORD AND RECEPTACLE
MUST STILL BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRICAL
SHOCK.
WARNING:
Check extension cords before each use. If damaged replace immediately.
Never use product with a damaged cord since touching the damaged area could cause electrical
shock resulting in serious injury.
8