ARDES AR451B Mode D'emploi page 13

The apparatus can emit both cold air and hot air depending upon the
function selected by means of the function switch. Make sure that the
function switch is in the OFF position before connecting
or disconnecting the apparatus.
To turn the appliance on, insert the plug in the power outlet, set the
operation switch in the desired position and turn the temperature switch
clockwise to the maximum position.
Once the desired room temperature is reached, turn the handle slowly, in
a counter clockwise direction, until the appliance is turned off.
At this point, the product will automatically restart when the temperature
in the room goes below the set limit.
The indicator light indicates that the apparatus is operating and will switch
off when the adjustable thermostat is activated.
In order to activate the oscillating function, press the switch that you find
on the fixed part of the appliance (provided on item 453B only).
Make sure that the apparatus has cooled down completely before storing
it in the box.
This appliance does not require any special maintenance.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the apparatus and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Instructions for use
Maintenance
GB
GB
13