Specifications; At The Beginning - JUKI MF-7200D/UT42 Manuel D'utilisation

!. SPECIFICATIONS

Model name
Model
Sttch type
Example of applcaton
Max. speed of sttch
Needle gauge
Dfferental feed rato
Sttch length
Needle
Needle bar stroke
Dmensons
Weght
Lft of presser foot
Feed adjustment method
Looper mechansm
Lubrcatng system
Lubrcatng ol
Ol reservor capacty
Installaton
Nose

@. AT THE BEGINNING

1
Sem-dry head hgh-speed, small cylnder-bed coversttch machne
Hemmng and coverng for knts and general kntted fabrcs
Max. 4,000 st/mn (at the tme of ntermttent operaton)
3-needle ... 5.6 mm and 6.4 mm
2-needle ... 3.2 mm, 4.0 mm and 4.8 mm
1 : 0.8 to 1 : 1.8 (sttch length : less than 3.2 mm)
Mcro-dfferental feed adjustment mechansm s provded. (Mcro-adjustment)
1.4 mm to 3.2 mm (can be adjusted up to 4.2 mm)
UY128GAS #9S to #12S (standard #10S)
(Heght) 450 x (Wdth) 444 x (Length) 285
6 mm (needle gauge : 5.6 mm wthout top coverng), and 5 mm (wth top coverng)
Man feed ... dal type sttch ptch adjustment method
Dfferental feed ... lever adjustment method (mcro-adjustment mechansm s provded.)
Forced lubrcaton method by gear pump
Ol gauge lower lne : 600 cc to upper lne : 900 cc
- Equvalent contnuous emsson sound pressure level (L
A-weghted value of 80.0 dB; (Includes K
GR2 at 4,000 st/mn.
MF-7200D seres
ISO standard 406, 407, 602, and 605
31mm
UT42 : 48kg, UT45 : 44kg
Mcro-lfter mechansm s provded.
Sphercal rod drve method
JUKI MACHINE OIL 18
Top mount type, Sem-submerged type
pA
= 2.5 dB); accordng to ISO 10821- C.6.2 -ISO 11204
pA
Remove fixed band 1 for transportaton before settng
up the sewng machne.
– 1 –
) at the workstaton :