Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe Metris Classic 31073 Serie Mode D'emploi / Instructions De Montage



Safety Notes

Gloves should be worn during installation to prevent

crushing and cutting injuries.
The shower system may only be used for bathing,

hygienic and body cleansing purposes.
The hot and cold supplies must be of equal pres-

sures.

Installation Instructions

• The fitting must be installed, flushed and tested after
the valid norms.
• If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
(flow limiter) located behind the aerator can be
removed.

Technical Data

This mixer series-produced with EcoSmart
limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Hansgrohe mixers can be used together with hydrauli-
cally and thermically controlled continuous flow heaters
if the flow pressure is at least 0,15 MPa.
4
All manuals and user guides at all-guides.com
English
®
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 31

Symbol description

Do not use silicone containing acetic acid!
Dimensions (see page 34)

Flow diagram

(see page 34)


Operation (see page 35)
®
Cleaning (see page 36) enclosed
brochure
(flow
Spare parts (see page 37)
XXX = Colors
000 = chrome plated
880 = satin chrome
Special accessories
special tool (58085000) order as an extra
Installation kit order as an extra
Test certificate (see page 38)
with EcoSmart
®
without EcoSmart
®