Signal Quality - VESTEL AC22 Serie Directives D'installation

Masquer les pouces Voir aussi pour AC22 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

7.7 Signal Quality

GSM / 3G connection quality will vary based on
the operator grid coverage area. During device
installation, the connection quality must be checked.
The device direction and placement must be
completed where the signal quality is best.
i.
In
a
SIGNALQUALITY;ON;
(Notepad, MS Word etc.) (Do not use TeraTerm)
ii. Press Enter to move the cursor to the
next line and copy all you have input starting from
this line.
iii. Right click on Teraterm.
Click OK and wait for charging station response.
iv. The signal quality will be displayed on
the screen in regular intervals.
v. Following checking the signal quality,
input
SIGNALQUALITY;OFF; at a different software to
turn off control function (Notepad, MS Word etc.) (Do
not use TeraTerm).
vi. Press Enter to move the cursor to the
next line and copy all you have input starting from
this line.
vii. Right click on Teraterm. Click OK.
If the signal quality is between 0-14, the signal is not
powerful enough to establish connection.
If the signal quality is between 14-22, the signal is at
medium level and you can configure your charging
station.
If the signal quality is between 22-31, the signal is
at high level.
7.8
Charging
Station
Configuration
a. APN
For mobile grid data connection APN (Access Point
Name) configuration, follow the steps below.
i. In a different software, input APN;xxx;
(Notepad, MS Word etc.) (Do not use TeraTerm)
Input the value
Your SIM card is required to change xxx.
Picture.2
different
software
OCPP
Connection
ii. Add Enter to the end of the text.
Copy what you have input.
iii. Right click on Teraterm.
Click OK and wait for charging station response.
input
b. APN USER
IF APN user setup is required, complete this section.
iv.
SETAPNUSER;xxx;
. (Notepad, MS Word etc.)
(Do not use TeraTerm)
Input the value where your SIM card should replace
xxx.
v. Add Enter to the end of the text.
Copy what you have input.
vi. Right click on Teraterm.
Click OK and wait for charging station response.
c. APNPASS
IF APN password setup is required, complete this
section.
i.
SETAPNPASS;xxx;
. (Notepad, MS Word etc.)
English - 8 -
Picture.3
In
a
different
software,
Picture.4
In
a
different
software,
input
input

Publicité

Table des Matières
loading

Table des Matières