Using The Tilting Pocket - Samsung RFG28MESL Manuel

2. Tempered Glass shelves
To remove - Tilt up the front of the shelf in the
direction shown (1) and lift it up vertically (2). Pull the
shelf out.
To relocate - Tilt the front of the shelf up and guide
the shelf hooks into the slots at a desired height.
Then lower the front of the shelf so that the hooks
can drop into the slots.
The Tempered Glass shelves are heavy. Use
special care when removing them.
CAUTION
2
3. Vegetable & Fruit Drawers
• After pulling out completely the vegetable pan,
take it out by lifting up the front and pull it
forward.
• To remove the shelf of the vegetable pan, press
the button on the left side of the shelf while you
are lifting it. Pull it out slowly.
Reassemble in the
inverse order of
CAUTION
the disassembly.
The assembly is
completed when you
hear a "Click".
4. Flex Zone
To remove the Flex Zone
– Pull the Flex door out
to full extension. Lift the
Flex Zone up, pulling it
to your body with both
hands.
To relocate the Flex
18_ operating
DA99-03404E-11.indb 18 DA99-03404E-11.indb 18
All manuals and user guides at all-guides.com
1
Rounded up while pressing Rounded up while pressing
the button the button
Button Button
Zone – Open the Flex door to full extension. Tilt the
front of the Flex Zone up, place the back of the Flex
Zone onto the rails, and then lower the front until the
whole Zone rests on the rails.
When the Flex Zone or LED
lighting are not working, check the
connectors [ ( 1 ), ( 2 ) shown below]
for cracks or leaks.
1
1. Refer to page 9 for disassembly instructions.
2. Open the cover housing with a flat-blade
screwdriver.

USING THE TILTING POCKET

The Tilting Pocket can be used to store up to
a 406mm pizza if you place it as shown in the
illustration.
2
2015. 5. 7. 2015. 5. 7. 8:08 8:08