Making Minor Adjustments Between Doors; Adjusting The Freezer Drawer Level - Samsung RFG28MESL Manuel

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAKING MINOR ADJUSTMENTS
BETWEEN DOORS
Remember a level Refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on leveling the
Refrigerator.
Fixed
Fixed
Part
Part
1. If you open the drawer ( 1 ), you can see the
lower hinge ( 2 ) .
2. Insert a philips screwdriver (+) ( 3 ) into the shaft
( 4 ) of the lower hinge.
3. Adjust the height by turning a philips screwdriver
(+) ( 3 ) clockwise ( 
UP
UP
 ).
1
When you turn a philips screwdriver (+)
counterclockwise ( 
move up.
ADJUSTING THE FREEZER
DRAWER LEVEL
Adjustment part
Adjustment part
DA99-03404E-11.indb 11
DA99-03404E-11.indb 11
All manuals and user guides at all-guides.com
Adjustment
Adjustment
part
part
 ) or counterclockwise
DOWN
DOWN
2
4
3
3
 ), the door will
Freezer Drawer
Freezer Drawer
1. Locate the height-adjuster ( 1 ) in the freezer
drawer.
Unscrew the four Phillips screws ( 2 ) slightly to
loosen the door.
1
2. Loosen the controller screw ( 3 ) with a Phillips
screwdriver.
3
3. Find the best level to align the door slope.
Example)
Example)
The slope is about 2mm (0.08inch) as shown below.
The slope is about 2mm (0.08inch) as shown below.
-
-
Rotate the Height Adjuster to -2.0 to reduce the door slope.
Rotate the Height Adjuster to -2.0 to reduce the door slope.
Slope
Slope
Reference
Reference
plane
plane
After adjustment, fi rst tighten screw ( 3 ) and
then screw ( 2 ) .
CHECKING THE WATER LINE
A water dispenser is one of the helpful features on
your new Samsung Refrigerator. To help promote
better health, the Samsung water fi lter removes
unwanted particles from your water.
2
setting up _11
2015. 5. 7.
2015. 5. 7.
8:08
8:08

Publicité

Table des Matières
loading

Table des Matières